Technical Parameters For Dental Handpiece. Working pressure: 0.25 Mpa to 0.3 Mpa.Rotation Speed:260,000rpm (torque);350,000rpm(standard). Speed of generator:25,000-30,000rpm. This complete kit includes low speed handpiece contra angle model, low speed handpiece straight model and low speed dental air motor. E-type connector - Push Button - Precise technology, Steady, no vibration while revolving, offering a steady operation. Suitable for any E-type handpiece accords with ISO standard - 135°C Autoclavable, suitable for both steam and chemical autoclave. Low Speed 22,000-27,000 rpm. The shank of the instrument mounted therein is 2.35 mm - Fastening of the instruments with a turning latch - Autoclavable 135°C - For any lab or E-type motors. Working pressure: 0.3MPa (4-hole); - 0.25MPa (4-hole) (Measure meter is installed at the end of air motor to measure the air pressure).
Supply air pressure: 245-392KPa (2.5-4kgf/CM2) - 1:1 Direct Drive - 4 holes - Max speed 20,000 min-1. E-type air motor 4-Hole: 1 each - Straight nose cone: 1 each - Contra Angle handpiece: 1 each - Water spray nozzle: 1 each - CAP Spanner: 1 each - English manual: 1 each. All items are in brand new condition unless specified. The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatory agencies.All of our products are CE approved. Please kindly check the copy of the certificate in the listing below.