Dental Imaging RVG X-Ray Sensor Size 1/Size 1.5/Portable X-Ray Machine Equipment

Dental Imaging RVG X-Ray Sensor Size 1/Size 1.5/Portable X-Ray Machine Equipment
Dental Imaging RVG X-Ray Sensor Size 1/Size 1.5/Portable X-Ray Machine Equipment
Dental Imaging RVG X-Ray Sensor Size 1/Size 1.5/Portable X-Ray Machine Equipment
Dental Imaging RVG X-Ray Sensor Size 1/Size 1.5/Portable X-Ray Machine Equipment
Dental Imaging RVG X-Ray Sensor Size 1/Size 1.5/Portable X-Ray Machine Equipment
Dental Imaging RVG X-Ray Sensor Size 1/Size 1.5/Portable X-Ray Machine Equipment
Dental Imaging RVG X-Ray Sensor Size 1/Size 1.5/Portable X-Ray Machine Equipment
Dental Imaging RVG X-Ray Sensor Size 1/Size 1.5/Portable X-Ray Machine Equipment
Dental Imaging RVG X-Ray Sensor Size 1/Size 1.5/Portable X-Ray Machine Equipment
Dental Imaging RVG X-Ray Sensor Size 1/Size 1.5/Portable X-Ray Machine Equipment
Dental Imaging RVG X-Ray Sensor Size 1/Size 1.5/Portable X-Ray Machine Equipment
Dental Imaging RVG X-Ray Sensor Size 1/Size 1.5/Portable X-Ray Machine Equipment

Dental Imaging RVG X-Ray Sensor Size 1/Size 1.5/Portable X-Ray Machine Equipment

The product is mainly composed of a sensor, an adaptor, a USB connection cable and workstation software. Working together with an X-ray equipment, the Product is intended to make X-ray radiography in dental clinics or veterinary clinics. Sensor size Suitable for child.

Central Processor: Intel Core i3 or higher. Internal Memory: 4GB or higher. Hard Disk: 80GB or higher. Windows 7 SP1,8,10 32/64bit.

Net Framework 4.6 or higher, VC++ 2015. Able to display holes with 1mm, 1.5mm, 2mm and.

2.5mm diameter on the 0.5mm-thick aluminium foil. Total Cable Length: 3 m (sensor cable + control box cable to PC). Aluminum plate:1 PC (40406mm).

The tube voltage frequency of this machine is 30 KHz, and the tube current is 0.2 MA. The radiation scope is at an angle of 24 degrees, located within a distance of 1.2 meters ahead. Toshiba 0.3mm x 0.3mm micro-focus tube 3.

No protective operation room is needed when installing the complete machine. Flexible adjustment of position and angle of handpiece 5. Compact in volume, light in weight, convenient for carrying 6. Time is adjustable, high contrast of picture, imaging in focus 7. There are vacuum components and high-pressure parts inside of the machine, so for your safety and the maintenance of the machine 8.

The tube head is equipped with excellent radiation-shield protection except the radial mouth, and tests have shown that the radial index is zero. Non-film inspection and storage can be realized when corresponding to a sensor. 20cm Tube voltage: 60KV Relative Humidity(RH). Operation of the Main Unit. Make sure the fittings on the encasement list are packaged within the box.

This model combines the advantages of similar products found at home and abroad; it eliminates the shortcomings of the on-frequency X-ray machine (high current intensity and excess amounts of scrap x-rays). Using a Toshiba 0.3 micro-focus tube. The tube voltage frequency of this machine is 30 KHz, and the tube current is 1 MA.

This is an innovative Chinese design named the Green X-ray Machine. Focal Spot To Skin Distance. Reference of the time of exposure. Install the blue ray tube to the foreside of the ball head, then tighten it. Turn on the Power;the pilot lamp will be light up.

During this time, the digital tube will show the fore setting time. Now the equipment is in standby mode. Setting the time (Skip to next step if unneeded) Use the "SET", "+", and" -" buttons to reset the time as follows: press SET, the pilot lamp above is illuminated, the machine is now in the time setting mode?

Then press "+" and" -" to set the time needed (time range is 1-9seconds); press set again when the time is adjusted the light lamp is off. The equipment is now in standby mode.

Put the Tooth film plumb behind the tooth which is going to be taken picture, and be as close as possible (the smooth side stick to the tooth). Keep the ball head plumb to the tooth projection position; Have the ball head, tooth, and tooth film steadily mutually plumb. After positioning, use the ON/OFF on the main Unit, to take pictures.

(Notice: gently press 0.5 sec to turn it on). After exposure to the tube, press the start button again in case of an emergency to stop shooting and return to standby status.

(At this point there was no output ray, so the dental films can be used again). Turn the power off when the work is finished, press POWER, making sure the pilot lamp is off. Don't keep the machine long in standby mode. Make sure the angle of film, tooth, and ball head are properly aligned when taking a picture.

Keep them steady until the last step of picturing; making sure that there is no change in any of their positions. Remember to turn the power 0ff when work is done.

Charge the battery if the machine cannot work and the red lamp lignt. After turning the power on, wait one minute before taking pictures, this allows the ray to provide a steady output. The equipment switches into protection mode automatically when the voltage is incorrect. If this occurs, it will not be able to carry out the normal work of filming. When taking pictures, the ON/OFF button could stop the objection and then the machine goes back to the preparation mode. Use high quality tooth film and developing liquid to make clear pictures. Handle the ball head gently while in use, so as not to damage the delicate component. We usually set the time between 3-8 seconds when taking pictures, but the actual time of ray output is 0.2-0.5 seconds.

Keep the tooth film and the liquid in a proper place and use them within the shelf-life period. Development of films should be performed at temperatures ranging between 23-25 degrees Celsius to ensure the image quality. Other requests accordance with the scope of the technical parameters. Please read the manual carefully before using. No protective operation room is needed when installing the complete machine 4.

FDA Statement: The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatry agencies. If the item you received is damaged or defective, Please message to us immidately. Our guarantee does not cover accidental damage or wear of product caused by customer. Thank you very much for your understanding! We understand the concerns and frustrations you might have, and will try our best to resolve the isuues. Serivce is our #1 priority at BAISTRA!

If you message us immediately after placing the order, we will make every effort to assist you with your change request. We offer the best items at the best prices. We strive to exceed all your expectations and put a smile on your face. We stand behind our products and pride ourselves on OUTSTANDING customer service. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\X-Ray Machines & Equipment\Digital X-Ray Sensors".

The seller is "allguest" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, Korea, South, Indonesia, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Croatia, Republic of, Brazil, Chile, Colombia, Cambodia, Luxembourg, Macau, Peru, Vietnam.


Dental Imaging RVG X-Ray Sensor Size 1/Size 1.5/Portable X-Ray Machine Equipment


New Portable Equipment    Sitemap    Contact Us    Privacy Policies    Service Agreement