Optical Fiber Identifier is an essential instrument for the installation and maintenance of optical fiber projects. It can easily detect any spot of SM fiber cables. Through inserting a 1310 or 1550 modulated signal into the fiber, it is used to indicate the direction of the transmitting signals, find and locate the specific fiber without interrupting the normal work during the installation, cabling and maintenance. Compact size, universal connector and mental material.Efficient identification without interrupting the current work. H0.25 to test bare fiber, ribbon and H0.9/H2.0/H3.0. Display the direction and level of the transmitting signal. Identified Wavelength Range(nm): 8001700nm. Detector Type: InGaAs 2 pcs. Identified Signal Type: CW, 270Hz, 1kHz, 2kHz. Adapter Type: 0.25 to test bare fiber, 0.9 ribbon, 2.0/3.0 pigtail.
Insertion Loss: 0.250.9/0.1dB. 2.53.0/1.0 dB. Signal Direction: Left & Right LED. Power Supply: AAA 1.5V(Not include).
The fiber should be put in the groove according to the specific type. Pls use the cotton swabs to clean the detector surface regularly tp keep it from dust. Pls take out the battery when it is not in use for a period of time.Select the appropriate adapter head according to the different types of fiber. Insert the fiber to the adapter head when using the 2.0 and 3.0 connectors.
Insert the fiber to the groove on the clamp when using the 900 and 250 connectors. 1.2 Clamp and loosen. Pls insert the fiber into the adapter head and then push the "clamp pushing button" up to clamp the fiber and test it.Pls push foward slightly to loosen the adapter head. Push up the "clamp pushing button" to turn on the unit. Loosen the "clamp pushing button" to turn off the unit. 1.4 Optical Fiber Identifier. Insert the fiber to the adapter head and push the button up to lock calmp.
When optical signal passes the fiber, the LED illuminator will indicate the traffic's direction with intermittently audible tone and the relative core power will be also displayed in digital format. If no optical signal passes the fiber, the LED illuminator is dead and the "LO" will be displayed in the relative core power position. Fiber identifier can also detect the presence of 2KHz, 1KHz and 270Hz modulated tone with the continuously audible tone. To protect the instrument from being damaged, do not use under the high temperature, high pressure, wet or other prohibited condition. We assure that each unit meets the declared specification.
Technical Parameter is subject to change without notice. 1 x Optical Fiber Identifier. Please Check and Confirm the Part No. The item "Optical Fiber Identifier Optical Testing Equipment 900-1625nm 4 Adapter Heads" is in sale since Friday, June 17, 2016.This item is in the category "Business & Industrial\Test, Measurement & Inspection\Cameras & Imaging\Other Cameras & Imaging". The seller is "fiberoptictoolsshoppingmall" and is located in , . This item can be shipped worldwide.