Tattoo Transfer Stencil Machine Portable Thermal Copier Printer Office Equipment

100% brand new and high quality tattoo transfer copier is designed for tattoo transfer printing paper and thermal paper, providing fast and effective transfer printing. Made of high grade material, which is environmental, safe and durable for long term use. Mini size and lightweight for easy carry, compact energy saving, no ink needed for thermal printing. So, what are you waiting for? There are 4 touch buttons for different functions and they are also indicator lights that can indicate the status of the printer, including cancel button, feed button, WLAN button and also power button, which is very convenient and functional. Comes with the USB cable, the printer can be connected with computer. For WLAN connection of thus printer, it can support two kinds of operating modes: client-side and hotspot. The printer has the sleep function. When there is no paper feeding, no data received and no operation in 3 minutes, the printer will be in sleep mode to reduce the power consumption. Smartphone or Tablet computer should be iOS 9.0 or above, and Android 4.0 or above. Suitable for printing tattoo transfer printing paper and thermal paper and the suitable paper size is A4 and B5, which provides fast printing speed, little noisy sound. Item Type: Tattoo Transfer Copier. Options: US Plug, EU Plug.

Print Speed: 2ppm (thermal paper) or 1ppm (tattoo transfer printing paper). Control Language of Printing: GDI. Paper Feeding Method: Manual Feeding. Paper Size: A4 & B5. Paper Type: tattoo transfer printing paper and thermal paper.

Operating System: Windows XP, Windows Vista, Windows 7, Windows 8, Windows10, Android 4.0 or above, iOS 9.0 or above. Noise: Maximum sound pressure level=58dB(A). 283 59 38.5mm / 11.1 2.3 1.5inch.

Net weight of machine: 545g. Advantage: Mini size, easy carry, compact energy saving, no ink needed for thermal printing. Make sure that the power cord of the printer is connected correctly.

Start the printer and the indicator lights are lit. Wait for the paper feeding indicator light goes out, and then the printer is prepared to print. Confirm that the printer driver has been installed correctly and it works normally. Connect the printer to PC via USB or WLAN.

Put the paper into the printer till the printer automatically leads the paper to the right place. Note: please make sure to start the computer first, and then start the printer (if print via WLAN, please connect to the network first), or it may lead to the computer can't recognize the printer. If the computer can't recognize the printer, please restart the printer or reinsert USB cable or reconnect to WLAN. Open the document needed to print, and select "Print" in the "File" menu. The printer begins to print and the window of "OEP103W Status Monitor" pops up on the computer. When print via WLAN, please make sure the printer has already been connected successfully. Please select "OEP103W-WLAN" in the drop-down list box in the "Name" in "Print" dialog box, and other procedures are same with USB printing operation. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

(1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. We will provide an adapter for you according to different country standard and ensure its normal use. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country's. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls.

Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

The item "Tattoo Transfer Stencil Machine Portable Thermal Copier Printer Office Equipment" is in sale since Friday, June 12, 2020. This item is in the category "Health & Beauty\Tattoos & Body Art\Other Tattoos & Body Art".

The seller is "modernlife100" and is located in Shenzhen. This item can be shipped worldwide.

Paper Feeding Method: Manual Feeding
Operating Temperature: 5 ~ 40
Storage Humidity: 5% ~ 90%
Paper Type: tattoo transfer printing paper and thermal paper
Print Speed: 2ppm (thermal paper) or 1ppm (tattoo transfer printing paper)
Control Language of Printing: GDI
Print Method: Thermal Printing
Material: Metal
Adapter: AC 110V-220V
Item Type: Tattoo Transfer Copier
Atmospheric Pressure: 86kPa ~ 106kPa
Power Supply: 14V 6A
Operating Humidity: 40% ~ 60%
Printer Port: USB2.0
Paper Size: A4 & B5
Power: 150W (Maximum)
Resolution: 200dpi x 200dpi
Storage Temperature: -25 ~ 40
Brand: Unbranded
Bundle Listing: Yes
Color: Gold
Consumables: None
MPN: Does Not Apply
Type: Tattoo Transfer Copier