And the attached safety chain has been secured in its designated slot, the log is ready to be easily and safely cut into whatever lengths of firewood you desire. Having the log elevated on the VP Hitch.
Makes cutting firewood with a chainsaw a much more comfortable experience as it allows the operator to cut from an upright, standing position. Reducing the common low back pains associated with bending over and cutting with a chainsaw makes this product a winner right out of the gate! Another benefit that is immediately noticed when using the VP Hitch. Is the fact that your chainsaw chain never comes close to the ground! Sharp chains are frequently and quickly dulled from accidentally cutting too far through a log on the ground and hitting rocks or dirt.
Comes with 4 threaded pins and 5 threaded receiving holes allowing the user to customize the pin arrangement for just about any size log. If youre an experienced chainsaw operator with a fairly steady hand, you can even make rough sawn lumber with the VP Hitch! Placing threaded pins in the 4 outer holes on the back plate allows larger sized logs to be utilized.8ft boards can be cut from a 9ft. For lumber cutting, once your log is safely secured to the VP Hitch. Begin by removing your slab wood. Careful that you dont cut too far on the bottom slab and accidentally run your chainsaw into the VP Hitch.
Lumber cuts can be made either vertical or horizontal from the remaining beam that was previously a round log. If cutting in the horizontal direction (parallel to the ground), begin by cutting from the bottom of the beam to avoid pinching your bar. Cut your boards one by one up to the desired length and when the last board is cut simply cut your lumber free from the remaining 1ft.
Piece that is still held in the VP Hitch. Using a sharp draw knife, The VP Hitch.Is also the ideal tool for peeling logs or poles! Need to paint or stain some lumber or beams? Included angle attachment, turns it into a tool that also holds most any size lumber or beam. Remove the threaded pins from the back plate and place them in their designated storage holes. Place the angle attachment that was removed from its storage hole into either the center or top hole of the back plate. Now, turn the angle attachment to a position that best matches the thickness of your lumber or beam. If a more semi permanent attachment of the lumber or beam is desired to prevent side to side movement, simply place 2 (or 4) screws through the bottom of the board or beam through the holes which are provided in the cradle upon which the board or beam rests. A long wide board (attached with screws through the bottom of the cradle) also serves well as a temporary pic-nick table for small children! Set up some firewood rounds for seats and youre the hit of the party! See it in action at. One great firewood cutting holder/hitch! Patent Pending Made in the U. The item "Versatile Purpose Hitch Portable Sawmill, ATV attachment" is in sale since Saturday, September 12, 2015. This item is in the category "Business & Industrial\Agriculture & Forestry\Forestry Equipment & Supplies\Equipment". The seller is "toto_friend" and is located in Medford, Oregon.
This item can be shipped to United States.